Item is supplied with Hoselock Clunk Click Hose Fittings (see images)
Resin vessels are used for the deionisation and purification of water. This resin vessel has a capacity of 11.0 litres, and used in conjunction with DI resin can produce top quality water which is suitable for any pure water application, including pole window cleaning, drinking water, aquatics, car valeting, gardening and hydroponics as well as fish keeping.
Features:
- 8" diameter, 17" high (excluding base and head)
- 11.0 litre capacity
- Includes stand (base)
- Choice of fittings included
- Complete vessel, all parts included and assembled, such as the riser pipe, resin head, and internal parts. Hose fittings will require fitting (PTFE tape is supplied)
- Complies with all requirements of P.E.D. 97/23/EC directive
- Suitable for drinking water following KTW recommendations
Operating Specifications:
- Maximum pressure: 10.5 bar (150 psi)
- Maximum temperature: 49°C (120°F)
- Minimum temperature 1°C (34°F)
- Maximum vacuum: 127 mm Hg (5" Hg)
- Vessel approved for water filtration use only
- Vessel must not be exposed to temperature below -29°C (-20°F)
How to fill and connect a Vyair DI resin vessel
- Remove the resin vessel from its packaging.
- Apply 6-8 turns of PTFE sealing tape onto the thread of the fitting that is going to screw into the vessel head.
- Ensure that all required fittings are installed before proceeding.
- Unscrew the head from the resin vessel and pull upwards, you will notice that a plastic pipe is installed on the underside of the head.
- Using a funnel, pour the resin into the vessel so the resin is halfway up the vessel.
- Then tap the vessel down to compact the resin.
- Again, using a funnel, add more resin into the vessel into the resin is level with the “shoulder” of the vessel.
- Tap the vessel down again. (if the resin is not level with the “shoulder” of the vessel, then repeat steps 7-8 again until it is level).
- Remove any resin from the threads of the vessel.
- Next push the plastic pipe (that was removed during step 4) back into the vessel and screw the head back on the vessel body. Ensure that the plastic pipe is centered otherwise the head/lid will become cross-threaded and that the o ring is present on the head.
- Next, connect your inlet & outlet pipes to the vessel (ensuring to follow the flow direction or “in” & “out” on the vessel head).
- Turn the water supply to the vessel on and check for leaks.
- If there are leaks on the fittings, please tighten the fitting or remove the leaking part and repeat steps 2-3.
- The process is now complete.
This FRP tank is Tested and Certified by NSF International against NSF/ANSI Standard 44 for materials and structural integrity requirements.
Please Note: Fitting colour may differ from product image.
Item is supplied with Hoselock Clunk Click Hose Fittings (see images)
Resin vessels are used for the deionisation and purification of water. This resin vessel has a capacity of 11.0 litres, and used in conjunction with DI resin can produce top quality water which is suitable for any pure water application, including pole window cleaning, drinking water, aquatics, car valeting, gardening and hydroponics as well as fish keeping.
Features:
- 8" diameter, 17" high (excluding base and head)
- 11.0 litre capacity
- Includes stand (base)
- Choice of fittings included
- Complete vessel, all parts included and assembled, such as the riser pipe, resin head, and internal parts. Hose fittings will require fitting (PTFE tape is supplied)
- Complies with all requirements of P.E.D. 97/23/EC directive
- Suitable for drinking water following KTW recommendations
Operating Specifications:
- Maximum pressure: 10.5 bar (150 psi)
- Maximum temperature: 49°C (120°F)
- Minimum temperature 1°C (34°F)
- Maximum vacuum: 127 mm Hg (5" Hg)
- Vessel approved for water filtration use only
- Vessel must not be exposed to temperature below -29°C (-20°F)
How to fill and connect a Vyair DI resin vessel
- Remove the resin vessel from its packaging.
- Apply 6-8 turns of PTFE sealing tape onto the thread of the fitting that is going to screw into the vessel head.
- Ensure that all required fittings are installed before proceeding.
- Unscrew the head from the resin vessel and pull upwards, you will notice that a plastic pipe is installed on the underside of the head.
- Using a funnel, pour the resin into the vessel so the resin is halfway up the vessel.
- Then tap the vessel down to compact the resin.
- Again, using a funnel, add more resin into the vessel into the resin is level with the “shoulder” of the vessel.
- Tap the vessel down again. (if the resin is not level with the “shoulder” of the vessel, then repeat steps 7-8 again until it is level).
- Remove any resin from the threads of the vessel.
- Next push the plastic pipe (that was removed during step 4) back into the vessel and screw the head back on the vessel body. Ensure that the plastic pipe is centered otherwise the head/lid will become cross-threaded and that the o ring is present on the head.
- Next, connect your inlet & outlet pipes to the vessel (ensuring to follow the flow direction or “in” & “out” on the vessel head).
- Turn the water supply to the vessel on and check for leaks.
- If there are leaks on the fittings, please tighten the fitting or remove the leaking part and repeat steps 2-3.
- The process is now complete.
This FRP tank is Tested and Certified by NSF International against NSF/ANSI Standard 44 for materials and structural integrity requirements.
Please Note: Fitting colour may differ from product image.
Black Friday Shipping - Between 25th November and 2nd December
All orders placed between the 25th of November and the 2nd of December will be subject to extended dispatch times.
Although we will still try to dispatch all orders within our usual 24 hours, we expect there will be delays during busy periods of the sale and are asking customers to please allow 3 working days for dispatch. Please keep an eye on your orders and look out for your dispatch email and associated tracking numbers
Thank you for your patience during this busy period
Imran
Postage, Packing and Insurance
-
in2Detailing offers free Next Day Delivery for all orders over £60 within the UK Mainland. Orders under £60 will be subject to a carriage charge unless otherwise specified. Carriage options and prices will be displayed at checkout (please see below for more information on services offered). Cut off for Mainland UK Next Working Day Delivery is 12pm (Monday to Friday).
-
Our Next Working Day Delivery is applicable Monday to Friday with orders placed on Friday, or after the cut-off on Thursday, due to arrive on Monday. Orders placed after the cut-off on Friday or on Saturday or Sunday will be SHIPPED on Monday to arrive on Tuesday. We do not currently offer a Saturday delivery option.
-
Our Courier Delivery Service is NOT A GUARANTEED NEXT DAY DELIVERY SERVICE. Although couriers deliver over 95% of orders the next working day, we cannot guarantee every order will be received the Next Working Day. Postal charge refunds will NOT be issued for delays caused by Couriers.
-
Royal Mail Tracked 48 is quoted by Royal Mail as being a 2 Day Delivery Service. Please note - THIS IS NOT GUARANTEED. Royal Mail Tracked 24 is quoted by Royal Mail as being a Next Day Delivery Service, again, THIS IS NOT GUARANTEED
-
Orders outside the UK, but within Europe, will be charged a flat rate of £20.00 per order. WE ARE CURRENTLY NOT SHIPPING TO EUROPE. Apologies for any inconvenience caused.
-
Carriage to Northern Ireland is displayed at checkout and will vary depending of the weight of the order.
-
We aim to dispatch all orders within 1 working day of being placed.
-
Carriage cost for all delivery options includes insurance for loss or damage in transit.
-
Please ensure you have supplied us with a valid e-mail address so that we can confirm receipt of your order and contact you to assist you in monitoring it's progress.
-
If your delivery can be left with a neighbour or in a safe place by your property, please advise us when placing your order and adding the appropriate door number or location in the "special delivery instruction section". Please note that we do not take responsibility for any packages that are left safe or with a neighbour.
In the unlikely event that goods ordered do not arrive within the expected time frame please contact us.