Gtechniq EXO v4 Ultra Durable Hybrid Coating 30ml
Review: 5 - "A masterpiece of literature" by , written on May 4, 20020
Great
Latest Products
  • electro-track-order-icon
  • Free Delivery
    On Orders Over £60
  • electro-thumb
  • Satisfaction Guarantee
    Feedbacks
  • electro-return-icon
  • Price Match Promise
    For Free Return
  • electro-payment
  • Payment
    Secure System
  • electro-brands-icon
  • Only Best
    Brands

Gtechniq EXO v4 Ultra Durable Hybrid Coating 30ml

Available:Out of Stock
Wishlist Compare
    £44.00

    Why use Gtechniq EXOv4?

    EXOv4 delivers a hard film that makes water-spots easy to remove, offers great resistance to all wash chemicals and can help withstand micro-marring. It produces a high-gloss, warm-looking, extreme hydrophobic finish.

    EXO delivers a consistent film that is more durable and resistant to road salt and wash chemicals than its predecessors. Application is easy, with a slow flash-off time, giving more time to achieve a perfect finish.

    All of the above combined with the introduction of a good degree of swirl resistance means EXOv4 represents a major leap forward in Last Surface Protection (LSP) technology. 

    Box contains:
    1 x 30ml or 50ml EXOv4
    1 x pair of nitrile gloves
    1 x AP2 Ultra Soft Foam Filled Applicator
    1 x Master Instruction Leaflet
    1 x WS1 Gtechniq Window Sticker

    • Up to 2 years durability on a daily driver
    • Same great gloss, water and dirt repellency
    • Significantly easier to apply

    Application

    • Ensure that you have sufficient product to coat your vehicle.  For cars up to and including a medium estate car eg a BMW 3 series touring, 30ml is sufficient but for full sized cars including 4x4s and SUVs you will need the larger 50ml bottle
    • EXOv4 can be applied as a standalone sealant or as a top layer for Gtechniq C1 Crystal Lacquer or Gtechniq Crystal Serum Light  (CSL) - we recommend applying C1 or CSL as a base coat for easy to mark and dark paints
    • If you are applying over C1, EXOv4 should be applied more than 2 hours but less than 12 hours after you finish the C1 application
    • If you are applying over CSL, EXOv4 can either be applied straight away after you have finished applying CSL starting the process at the same place you did with CSL and following the same order of panels you did with CSL, or it can be applied up to 24 hours after finishing the CSL application
    • In addition to this kit you will need at least two but ideally four Gtechniq MF1 ZeroR Microfibre Buff Cloths
    • Ensure that your vehicle is out of direct sunlight but warmer than 5 degrees celsius, is completely dry and will stay dry for at least 12 hours after application
    • If needed, polish your paintwork either by machine or by hand to remove any imperfection
    • Wipe down all surfaces using Gtechniq Panel Wipe and a Gtechniq MF1 ZeroR Microfibre Buff Cloth (apply the Panel Wipe to the cloth and buff - not directly to the panel) – if you are applying over newly applied C1 or CSL, this step is not required
    • Put on the nitrile gloves provided
    • Drop several (between 5 and 10) drops of product onto the applicator provided.  Work the liquid into the pad to get an even saturation
    • Apply with applicator provided in overlapping strokes to an area roughly 2’ x 2’ (60x60cm), or work to the bodylines of the vehicle
    • If the surface of the vehicle is between 5 and 15 degrees celsius, wait for two minutes and then fold your first MF1 twice to form a square, spread and remove most of the residue using a light touch.  If the surface is between 15 and 25 celsius wait for one minute and for temperatures above this, remove immediately
    • With your second folded cloth remove all remaining residues.  We advise to move your head so that you get direct and oblique views of your finish to spot all residue. It is also advisable to use bright, but flat lighting, to make residue spotting easier
    • Once you have finished coating your vehicle we recommend repeating the process starting from the same place as you did for the first layer and coating panels in the same order so that you coat your entire vehicle with two layers of EXOv4.  You do not need to wait between applying the first and second coating but it will not make it harder to apply the second coating if you do leave a much longer interval between applying the first and second layer
    • Allow the coating to cure for at least 12 hours before getting wet
    • We recommend allowing at least one week pass before washing your car
    • For maintaining your finish we recommend hand washing your vehicle using a Gtechniq WM2 Microfibre Wash Mitt, GWash and an MF4 Diamond Sandwich Microfibre Drying Towel
    • You will find that your vehicle is significantly easier to clean and whilst EXOv4 has significantly better resistance to caustic wash chemicals these chemicals will shorten the lifespan of any coating and are not recommended as part of your care routine
    • EXOv4 can be over coated with other products, but if this is done you will get the surface performance of the product you overcoat it with and not EXOv4
    • An unopened bottle of EXOv4 has a 12 month shelf life from the time of purchase
    • Store opened bottles in a dry and cool storage area that's out of direct sunlight
    • We recommend only using opened bottles within three months of opening

    Why use Gtechniq EXOv4?

    EXOv4 delivers a hard film that makes water-spots easy to remove, offers great resistance to all wash chemicals and can help withstand micro-marring. It produces a high-gloss, warm-looking, extreme hydrophobic finish.

    EXO delivers a consistent film that is more durable and resistant to road salt and wash chemicals than its predecessors. Application is easy, with a slow flash-off time, giving more time to achieve a perfect finish.

    All of the above combined with the introduction of a good degree of swirl resistance means EXOv4 represents a major leap forward in Last Surface Protection (LSP) technology. 

    Box contains:
    1 x 30ml or 50ml EXOv4
    1 x pair of nitrile gloves
    1 x AP2 Ultra Soft Foam Filled Applicator
    1 x Master Instruction Leaflet
    1 x WS1 Gtechniq Window Sticker

    • Up to 2 years durability on a daily driver
    • Same great gloss, water and dirt repellency
    • Significantly easier to apply

    Application

    • Ensure that you have sufficient product to coat your vehicle.  For cars up to and including a medium estate car eg a BMW 3 series touring, 30ml is sufficient but for full sized cars including 4x4s and SUVs you will need the larger 50ml bottle
    • EXOv4 can be applied as a standalone sealant or as a top layer for Gtechniq C1 Crystal Lacquer or Gtechniq Crystal Serum Light  (CSL) - we recommend applying C1 or CSL as a base coat for easy to mark and dark paints
    • If you are applying over C1, EXOv4 should be applied more than 2 hours but less than 12 hours after you finish the C1 application
    • If you are applying over CSL, EXOv4 can either be applied straight away after you have finished applying CSL starting the process at the same place you did with CSL and following the same order of panels you did with CSL, or it can be applied up to 24 hours after finishing the CSL application
    • In addition to this kit you will need at least two but ideally four Gtechniq MF1 ZeroR Microfibre Buff Cloths
    • Ensure that your vehicle is out of direct sunlight but warmer than 5 degrees celsius, is completely dry and will stay dry for at least 12 hours after application
    • If needed, polish your paintwork either by machine or by hand to remove any imperfection
    • Wipe down all surfaces using Gtechniq Panel Wipe and a Gtechniq MF1 ZeroR Microfibre Buff Cloth (apply the Panel Wipe to the cloth and buff - not directly to the panel) – if you are applying over newly applied C1 or CSL, this step is not required
    • Put on the nitrile gloves provided
    • Drop several (between 5 and 10) drops of product onto the applicator provided.  Work the liquid into the pad to get an even saturation
    • Apply with applicator provided in overlapping strokes to an area roughly 2’ x 2’ (60x60cm), or work to the bodylines of the vehicle
    • If the surface of the vehicle is between 5 and 15 degrees celsius, wait for two minutes and then fold your first MF1 twice to form a square, spread and remove most of the residue using a light touch.  If the surface is between 15 and 25 celsius wait for one minute and for temperatures above this, remove immediately
    • With your second folded cloth remove all remaining residues.  We advise to move your head so that you get direct and oblique views of your finish to spot all residue. It is also advisable to use bright, but flat lighting, to make residue spotting easier
    • Once you have finished coating your vehicle we recommend repeating the process starting from the same place as you did for the first layer and coating panels in the same order so that you coat your entire vehicle with two layers of EXOv4.  You do not need to wait between applying the first and second coating but it will not make it harder to apply the second coating if you do leave a much longer interval between applying the first and second layer
    • Allow the coating to cure for at least 12 hours before getting wet
    • We recommend allowing at least one week pass before washing your car
    • For maintaining your finish we recommend hand washing your vehicle using a Gtechniq WM2 Microfibre Wash Mitt, GWash and an MF4 Diamond Sandwich Microfibre Drying Towel
    • You will find that your vehicle is significantly easier to clean and whilst EXOv4 has significantly better resistance to caustic wash chemicals these chemicals will shorten the lifespan of any coating and are not recommended as part of your care routine
    • EXOv4 can be over coated with other products, but if this is done you will get the surface performance of the product you overcoat it with and not EXOv4
    • An unopened bottle of EXOv4 has a 12 month shelf life from the time of purchase
    • Store opened bottles in a dry and cool storage area that's out of direct sunlight
    • We recommend only using opened bottles within three months of opening

    Easter Weekend Shipping Information
    The Easter Weekend runs from Friday 29/03/2024 to Monday 01/04/2024.
    No orders will be shipped between these dates
    Any orders placed from after the cut-off on Wednesday but before the cut-off on Thursday will be shipped on Thursday 28/03/2024 but will not arrive till Tuesday 02/04/2024.
    Any orders placed after the cut off on Thursday 28/03/2024 will not be shipped till Tuesday 02/04/2024.
    We are still processing orders over the long weekend however the orders themselves will no leave till 02/04/2024
    Thank you in advance for your patience and understanding
    Imran


    Postage, Packing and Insurance

    • in2Detailing offers free Next Day Delivery for all orders over £60 within the UK Mainland.  Orders under £60 will be subject to a carriage charge unless otherwise specified.  Carriage options and prices will be displayed at checkout (please see below for more information on services offered).  Cut off for Mainland UK Next Working Day Delivery is 12pm (Monday to Friday).

    • Our Next Working Day Delivery is applicable Monday to Friday with orders placed on Friday, or after the cut-off on Thursday, due to arrive on Monday.  Orders placed after the cut-off on Friday or on Saturday or Sunday will be SHIPPED on Monday to arrive on Tuesday.  We do not currently offer a Saturday delivery option.

    • Our Courier Delivery Service is NOT A GUARANTEED NEXT DAY DELIVERY SERVICE.  Although couriers deliver over 95% of orders the next working day, we cannot guarantee every order will be received the Next Working Day.  Postal charge refunds will NOT be issued for delays caused by Couriers. 

    • Royal Mail Tracked 48 is quoted by Royal Mail as being a 2 Day Delivery Service.  Please note - THIS IS NOT GUARANTEED.  Royal Mail Tracked 24 is quoted by Royal Mail as being a Next Day Delivery Service, again, THIS IS NOT GUARANTEED

    • Orders outside the UK, but within Europe, will be charged a flat rate of £20.00 per order.  WE ARE CURRENTLY NOT SHIPPING TO EUROPE.  Apologies for any inconvenience caused.

    • Carriage to Northern Ireland is charged at a Flat Rate of £10 per order which can be selected at Checkout.

    • We aim to dispatch all orders within 1 working day of being placed.

    • Carriage cost for all delivery options includes insurance for loss or damage in transit.

    • Please ensure you have supplied us with a valid e-mail address so that we can confirm receipt of your order and contact you to assist you in monitoring it's progress.

    • If your delivery can be left with a neighbour or in a safe place by your property, please advise us when placing your order and adding the appropriate door number or location in the "special delivery instruction section". Please note that we do not take responsibility for any packages that are left safe or with a neighbour.

    In the unlikely event that goods ordered do not arrive within the expected time frame please contact us.

    Customer Reviews

    No reviews yet
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)

    Customer Reviews

    No reviews yet
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    0%
    (0)